Manage Buildings

The Buildings binder setting is a dependent binder setting for individual facilities in a Campus/Location Zone.

The Buildings setting is dependent on the Campus/Location setting but not on the Campus/Location Zones setting.

Remember that the Tabs setup within each binder can be used to further categorize content relating to a building.

Adding a Building

While logged into your ML Binders™ Software account as an Admin:

1. Select Buildings from the left side menu. The Manage Buildings screen will be displayed with no entries.

2. Select the Add icon () at the upper right of the screen to display the Manage Building screen.

3. Enter a name in the Building field.

4. Select the parent Campus/Location from the drop-down menu.

5. Select the same building that can be found in MLW

6. Upload an image for the building (this will display on the homepage)

7. Select the Save button. The Manage Buildings screen will be displayed showing the new entry.

8. Repeat steps 2 – 6 for each new Building desired.

Delete a Building

1. Select Buildings from the left side menu. The Manage Buildings screen will be displayed with no entries.

2. Select the  icon next to the building you would like to delete

Edit a Building name and/or parent Campus/Location

Select the Edit icon next to the Building settings to be edited. Perform steps 3  – 5 above as needed.